S
Satish jadav
About
Detail
United States
Contact Satish regarding:
work
Full-time jobs
Starting at
USD7k/month
Résumé
Jobs
verified_user
0% verified
- RIntegrated Access Network LeadReliance Jio India LtdAug 2015 - Current (11 years 3 months)Worked in RJIL LTE and VoLTE/5G NR project as Integrated Access Network Lead in Mumbai and my main responsibility are as follows. Managing the drive-test team for the SCFT of new sites and then the cluster drive after 90% of the sites in the cluster got on-air. Analyzing the log-files to check the swap, RSRP and SINR. Giving the suitable recommendation for poor RSRP and SINR patch. Planning of small cell to fill the coverage hole in the network. Recommendations to increase single server locations in order to improve throughput affected areas due to low SINR caused by pollution. Analyzing the Data KPI's such as Accessibility, Retainability and Mobility for the Network Improvement using MyCom dump. Analyzing the PCI confusion alarms on the ce
DAS Design EngineerEricssonMay 2015 - Aug 2015 (4 months)Saudi Arabia- RF Consultant (LTE)First Point GroupJun 2013 - Sep 2014 (1 year 4 months)Responsible for FTV & Cluster Benchmarking optimization for True Move projects. Post optimization of Cluster for LTE/Volte after swap & responsible for providing solutions and recommendation to meet the baseline/cluster target KPI of cluster. LTE/Volte Tuning: Performed Coverage & interference analysis (RSRP, and SINR) (using drive tests and statistical data to find out any coverage issues (overshooting cells, pilot pollution, best server signal strength, pilot Ec/No measurements, interference) as well as initiating short and long calls drive tests to find any Access (missing neighbors) Blocked/Dropped calls and delay/throughput issues and fixing them. UMTS Optimization: Troubleshooting RF issues (Pilot pollution and Missing Neighbors), Idl
- RF Engineer (2G/3G)First Point GroupMar 2013 - Jun 2013 (4 months)Thailand
- IRF EngineerIGTLDec 2012 - Jun 2013 (7 months)Worked on MCTRX to RRH swap project as a 3G RF Optimizer, in which aim is to analyze the KPI, changes before swap with respect to after swap. Also worked in the carrier addition project and analyzed the stats before the carrier was added, and how the new carrier is performing. Pre-launched 7 days and post-launched 7 days KPI monitoring in both MCTRX>>RRH and Carrier up-gradation project. Network Optimization Changes (neighbor list, tilts etc). Effects on UL Interference, and RTWP after the swap, if degraded, analyze and troubleshoot and given recommendation. To check, whether there is a sector swap, after the MCTRX>>RRH Swap. KPI analysis on sectorization and carrier up-gradation. KPI's analysis, Parameter analysis, counters ana
- CRF EngineerCovenant Tel MEAJun 2012 - Dec 2012 (7 months)RF Drive Test, Analysis for optimization of the networks. (Using drive test and post processing tools). Neighbor planning of new sites using Mipt2g and BCCH Planning KPI Analysis, and identifying worst cell. Analyzing reports for checking neighbor's discrepancies, cells having highest call drops, SDCCH, TCH drops, SDCCH congestion & blocking, TCH congestion & blocking etc. Handover analysis based on handover reports. Extensive analysis of drive test log files on Genex Assistant and recommend solution for call drops, setup failures, bad Quality patches and low coverage, to achieve the committed drive test KPIs for 2G. Prepare weekly report for top management to present the current cluster level KPIs in comparison with the committed KPIs and
- RF EngineerTechmahindra LtdDec 2011 - Jun 2012 (7 months)Cluster RF Optimization for LBS 2G/3G Live network (USA) handling AT&T GNG Full Project. Improvement of scanner KPI like SINR, percentage on LTE, RSRP, RSRQ and mobile KPI for 5 devices designated each for Long call DL & UL, Short call and CSFB MO & MT. Identifying polluted areas, coverage holes and giving tilt recommendations, changing azimuth, reference power to avoid/remove them. Analyzing call drops/ failures of LTE and CSFB using layer 3 messages and recommending necessary changes to improve these KPI's. Recommendations to increase single server locations in order to improve throughput affected areas due to low SINR caused by pollution. Analyzing the PCI confusion alarms on the cell and giving certain recommendations to solve the PCI c
- QRF EngineerQatar Telecom LtdJan 2006 - Dec 2010 (5 years)Worked on MCTRX to RRH swap project as a 3G RF Optimizer, in which aim is to analyze the KPI, changes before swap with respect to after swap. Also worked in the carrier addition project and analyzed the stats before the carrier was added, and how the new carrier is performing. Pre-launched 7 days and post-launched 7 days KPI monitoring in both MCTRX>>RRH and Carrier up-gradation project. Network Optimization Changes (neighbor list, tilts etc). Effects on UL Interference, and RTWP after the swap, if degraded, analyze and troubleshoot and given recommendation. To check, whether there is a sector swap, after the MCTRX>>RRH Swap. KPI analysis on sectorization and carrier up-gradation. KPI's analysis, Parameter analysis, counters ana
- GRF ConsultantGTL LtdOct 2004 - Jan 2006 (1 year 4 months)Launched the Greenfield2G/ 3G network in various countries... PSC and PRACH Planning of the 3g network and for the new sites coming in, using Atoll and MapInfo. 2g to 2g and 2g to WCDMA neighbor planning using the MapInfo and G5 Tool. Analyzing the drive logs using the Actix Analyzer and optimize the poor RSRP, poor SINR and low throughput area. This also involves the analysis of layer-3 messages for the improvement in the network. Parameter Audit and recommendation of corrective actions for discrepancy, if any. Parameter recommendations for improvement of impacted Accessibility, Call drop, Mobility and integrity KPI'S. Responsible for the acceptance report as per the costumer's requirement. Interference analysis of the sites with are less
- RRF EngineerReliance InfoComm LtdOct 2003 - Oct 2004 (1 year 1 month)Cluster RF Optimization for WCDMA Live network. Improvement of scanner KPI like SINR, percentage on LTE, RSRP, RSRQ and mobile KPI for 5 devices designated each for Long call DL & UL, Short call and CSFB MO & MT. Identifying polluted areas, coverage holes and giving tilt recommendations, changing azimuth, reference power to avoid/remove them. Analyzing call drops/ failures of 3G using layer 3 messages and recommending necessary changes to improve these KPI's. Recommendations to increase single server locations in order to improve throughput affected areas due to low SINR caused by pollution. Analyzing the PCI confusion alarms on the cell and giving certain recommendations to solve the PCI confusion alarms.
- MRF EngineerMicroqual Technologies LtdJun 2000 - May 2003 (3 years)RF Drive Test, Analysis for optimization of the networks. (Using drive test and post processing tools). Neighbor planning of new sites using Mipt2g and BCCH Planning TCH Congestion Analysis, KPI Analysis, and identifying worst cell. Analyzing reports for checking neighbor's discrepancies, cells having highest call drops, SDCCH, TCH drops, SDCCH congestion & blocking, TCH congestion & blocking etc. Handover analysis based on handover reports. Extensive analysis of drive test log files on Genex Assistant and recommend solution for call drops, setup failures, bad Quality patches and low coverage, to achieve the committed drive test KPIs for 2G. Prepare weekly report for top management to present the current cluster level KPIs in comparison wit
Education
verified_user
0% verified
- SBE in Construction EngineeringShah anchor Kutchi College of EngineeringJan 2000Mumbai, (Maharashtra, India) in the Year 2000